Skip Navigation

IDENT 250 CONVERTING PRESS

Ident 250 9ft Converting Press

Summary

The Ident 250 Converting Press starts the range of the wider web machines. They are built robustly to exacting standards, is easy-operable and versatile.

Modular design of the 250 machine allows interchangeability of its units with any other Ident manufactured units of the same web width.

Key benefits of this machine are:

- web widths up to 250 mm;
- faster production speeds - up to 100 m/min.;
- user-firendly interface of the controls.

General Specification

  • Maximum roll diameter on main unwind unit: 600 mm.
  • Maximum web width: 250 mm.
  • Maximum operating speed: 100 m/min.
  • Bed lengths: 4 ft (1.22m), 6ft (1.83m), 8ft (2.44m), 9ft (??m), 10ft (3.05m).
  • Underbed unwinds and rewinds: typically up to 5 depending on the bed length.
  • Maximum roll diameter on base unwind/rewind: 600 mm.
  • Standard mandrel supplied: 76 mm (3'').

Options & Features

  • Gearboxes can be fitted on any of the base rewinds to allow for reverse winding. All mandrels can be either standard spring locking or switched air core.
  • Clutching types available are: mechanical friction type, where little control of the web is required; electronic clutch with either follower arm or ultrasonic feedback control, where a reasonably high level of web tension control is required; electronic clutch or servo motor with high precision transducer control and/or calculated diameter feedback, for use where a very high level of web tension control over the web is required.
  • A double rewind arm or cabinet can be fitted to give 2 additional rewinds at the outfeed end of the machine.
  • Unwind units are available for this size machines incorporating web guiders, splicing tables and digital transducer tension control.
  • There are over 40 different standard and specialist units available for the 250 converting press.